Payment & Shipping Terms:
|Color:||Customized||Wheel Size:||14 Inch|
|Charging Time:||6-8 Hours||Motor:||Brushless|
Hydraulic Pump DOOCUN Excavator Machine DC225LC -9 With 128kw Engine Power
The detail parameter:
|Working range||engine model||Japan imported Isuzu 6BG1|
|Maximum vertical digging depth||9660||ratedpower(KW/rpm)||128.5kw/2100r/min|
|Maximum unloading height||6810||Engine output(KW)||47.4|
|Maximum digging height||9660||Number of cylinders||Number of cylinders|
|Maximum digging depth||6630|
|Stop surface maximum digging radius||9735||Hydraulic system|
|Maximum digging radius||9910||Main pump||South Korea imported variable axial piston pump|
|Body size||Rotary motor||South Korea imported rotary device / imported Kawasaki|
|Total track width(mm)||2990||Travel motor||South Korea imported TM40VD|
|Track shoe width(mm)|
|Total length of track(mm)||4440||Optional|
|Track grounding length(mm)||3645||Breaker line||Optional|
|Full height of the cab(mm)||3000||Quick connector||Optional|
|Back radius of gyration||2750||Rotary drill||Optional|
|Total transport height(mm)||3030||performance|
|Total transport width(mm)||2990||Stick digging force(KN)||97/102|
|Total length of transport(mm)||9510||Bucket digging force(KN)||136.2/144.1|
|Stick length(mm)||2900||Walking speed(KM/h)||3.1-4.5|
|Minimum ground clearance(mm)||480||Swing speed||12.4|
1, excavators in the work, strictly prohibited maintenance, maintenance, fastening and so on. In case of abnormal sound, peculiar smell and temperature rise, the parking should be checked immediately.
2, excavator should not turn too fast, such as curve is too large, should turn.
3, when the excavator rotates, the use of rotary clutch, with the rotating mechanism, brake rotation smoothly, prohibit sharp rotation and emergency braking.
4, before the bucket does not leave the ground, shall not do rotation, walking and other operations.
5, crawler excavator moving, the arm should be placed in the direction of walking forward, the bucket from the ground height of not more than 1 meters.
6, when the excavator uphill, the drive wheel should be in the back, the arm should be on; when the excavator downhill, the drive wheel should be in front, the arm should be behind. Downhill should be slow, no change on the way.
7, the arm pulley at the top of the maintenance, maintenance, lubrication and replacement, the arm should be dropped to the ground.
8, when digging, each eating soil should not be too deep, the bucket is not too strong, so as not to damage the machinery or cause overturning accident. When the bucket falls, take care not to go too fast, so as to avoid the instability of the lower frame and the whole machine before and after shaking.
9, with the excavator operation, for cleaning, leveling, slope repair personnel, must work outside the radius of the excavator. If it is necessary to work within the radius of the excavator, the excavator must stop turning and turn off the pilot switch before it can do its work. At the same time, the crew should cooperate closely to ensure safety.
10, within the scope of excavator loading, shall not stop vehicles and pedestrians. When unloading the truck, wait for the truck to stop. The driver leaves the cab to turn the bucket and unload the car. When turning, the bucket shall be avoided as far as possible from the top of the cab. When unloading, the bucket should be lowered as far as possible, but it shall not be allowed to hit any part of the truck.
Contact Person: jacky